■To cancel the auto power save function
Power consumption can be reduced by controlling the memory storage time. You can cancel the auto power save function.
1 Whilst in the stop mode ...
Hold down the MODE button until “SET UP” appears.
●When you release the button, “BEEP ON” or “BEEP OFF” will appear.
2 Press the 5or 4button until “AUTO Psave” appears.
3 Press the MODE button.
●“Psave OFF” will appear, and
the auto power save function will be cancelled.
●To restore the auto power save func- tion, select “AUTO Psave”.
4 Press the ■/:OFF button.
●The normal display will reappear.
About the sound skip guard memory: During playback, approximately 10 seconds of information is stored in the semiconduc- tor memory. Therefore, even when the pickup cannot read information for a second or two due to an external shock, the sound will continue without interruption because the information stored in memory is used.
About the auto power save function: This is a function used to save power when using the unit with the rechargeable bat- tery or the alkaline batteries. Whilst in the auto power save mode, 5 - 10 seconds of sound information is stored in memory. When the auto power save function is dis- abled, 10 seconds of sound information is always stored in memory. (When the AC adaptor or a car adaptor is used, the infor- mation storage time is always 10 seconds, regardless of the auto power save mode.) When the unit is used in places exposed to excessive vibration, cancel the auto power save function.
36
* | 37 | 99.3.11, 2:30 PM |
