Manuals / Sharp / Home Audio / CD Player

Sharp MD-MT20H operation manual MiniDisc Recorder

Models: MD-MT20H

1 44

Download 44 pages 40.08 Kb

Page 43

●The continuous recording time is for analogue inputs when the volume level is set to “VOL 0”.

●The continuous play time shows the value when the volume level is set to “VOL 15”.

●The above values are the standard values when the unit is charged and used at an ambient temperature of 20°C (68°F).

●The operating time when using an alkaline batteries may be different, depending on the type and manufacturer of the battery, and on the operating temperature.

Input sensitivity:	Recording level	Reference input level	Input impedance
	Recording level	Reference input level	Input impedance

	MIC H	0.25 mV	10 k ohms

	MIC L	2.5 mV	10 k ohms

	LINE	100 mV	20 k ohms

Output level:

Dimensions:

Weight: Input socket: Output socket:

	Specified	Maximum	Load
	output	output level	impedance
Earphones	—	10 mW + 10 mW	32 ohms
LINE	250 mV	—	10 k ohms
LINE	(-12dB)		10 k ohms
	(-12dB)

Width: 87.9 mm (3-7/16")

Height: 29.8 mm (1-3/16")

Depth: 79.7 mm (3-1/8")

230 g (0.51 lbs.) with rechargeable battery

Line/optical digital, microphone (powered by the main unit)

Earphones (impedance: 32 ohms)/remote control unit

■MiniDisc Recorder

Type:	Portable MiniDisc recorder
Signal readout:	Non-contact, 3-beam semi-conductor laser pick-up
Audio channels:	Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response:	20 – 20,000 Hz (± 3 dB)
Rotation speed:	Approx. 400 – 900 rpm
Error correction:	ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Coding:	ATRAC (Adaptive Transform Acoustic Coding), 24-bit
	computed type
Recording method:	Magnetic modulation overwrite method
Sampling frequency:	44.1 kHz (32 kHz and 48 kHz signals are converted to
	44.1 kHz, and then recorded.)
Wow and flutter:	Unmeasurable (less than ±0.001% W. peak)
	42

* MD-MT20H FOR UK(22-42)

43

99.3.11, 2:30 PM

Image 43

Sharp MD-MT20H operation manual MiniDisc Recorder

Contents

MD-MT20H Special Notes Service InformationMD-MT20H for UK01-21 99.3.11, 229 PM Accessories ContentsIntroduction Precautions PrecautionsVolume setting Concern for others when listen- ing to MiniDiscsDo not drop or subject the battery to shock About the Rechargeable BatteryNames of Controls and Indicators Remote control unitMain unit 17 18Rechargeable battery power Power SourceAC power Alkaline batteries powerPrecautions for alkaline battery use Digital recording Before RecordingType of recording Analogue recordingPlayback-only MiniDisc Types of discsRecordable MiniDisc To prevent recorded discs from being erased accidentallyTo stop recording Recording Using the Analogue CableRecording from CDs or MDs Synchro recording To interrupt recordingTo remove the MiniDisc To turn off the powerRecording from a tuner or a CD Manual recording Manual recording Recording Using the Optical Digital CableThere are cases where digital recording may be impossible Start recording Synchro recordingRecording from the microphone Mic synchro recording Recording from the MicrophonePress the /OFF button To interrupt a synchro recordingRecording from the microphone Mic manual recording To interrupt a recordingTimed auto mark will be created ev- ery 5 minutes Example when the setting is for 5 min- utesConvenient Recording Function About the timed auto markTo start recording from the middle of an existing track Recording tracks as a single trackMaking a track numbe automati- cally To create your own track numbers whilst recording Double time recording in monaural modePress the Mode button whilst the record- ing is paused To check the remaining disc timeTo erase all of the tracks at once To erase tracks To erase tracks one at a timeAbout Track Numbers When recording from digital inputs CDs/MiniDiscs onlyAbout the TOC When is the TOC recorded?About TOC recording Track number Track name Playback does not start when a MiniDisc is insertedPlaying a Minidisc EarphonesTo stop playback To interrupt playbackResume auto play function Convenient Playback Functions To play at double speed Mono recording only Random play or repeat playTo interrupt fast playback Total playing time To check the elapsed time and remaining time of the trackTo display the playing time of an indi- vidual track Name/stamp EditingWhat the editing function can do Disc/Track nameDivide MoveExample Following cases, tracks cannot be combined When one or both tracks to be combined have a nameCombine Disc nameTo erase a character Type of characters Characters symbolsTrack name Lights upTo delete characters To change disc names or track namesTo add characters MD-MT20H for UK22-42 99.3.11, 230 PM Analogue cable Using with Other EquipmentUnit Socket Recording will be made in the ana- logue mode Listening through a car stereoTo prevent the unit from being operated by mistake Checking the remaining amount of battery chargeHow to read the battery indicator Convenient Operation of the UnitWhilst in the stop mode To cancel the auto-play functionTo eliminate the confirmation sound To cancel the auto power save function Troubleshooting What is a MINIDISC?If trouble occurs Minidisc System Limitations Batt Empty Error MessagesGeneral MaintenanceSpecifications CleaningMiniDisc Recorder A9903.TO Terms of Guarantee