CONVENIENT OPERATION OF THE UNIT
■Checking the remaining amount of battery charge
The remaining amount of battery charge
is shown by the battery indicator ( 
) during operation.
Battery indicator
< How to read the battery indicator >
When the battery |
| When the battery | |||||||||
level is high |
| level is very low | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Since the battery level is very low, you cannot start recording or playback.
●When the battery is completely discharged, the battery indicator will flash. Recharge the battery or replace the alkaline batteries with a new one.
●When the battery has run completely out, “BATT EMPTY” will appear. Then, the power will be disconnected automatically.
Notes:
●When using the unit with an alkaline batter- ies or a rechargeable battery, the battery indicator will not correctly display the remain- ing capacity for approximately 20 seconds after the power has been turned on.
●When theAC adaptor included with this unit or a separately available car adaptor is used, the battery indicator will not be shown.
●The number of bars shown in the battery indicator may increase or decrease, de- pending on the operation being performed. This is normal.
■To prevent the unit from being operated by mistake
To avoid accidental operation of the unit, use the hold function.
Move the HOLD switch to the safety posi- tion (direction indicated by the arrow).
●When the unit is in the hold mode, press- ing the buttons will have no affect.
●To cancel the hold mode, move the HOLD switch away from the safety po- sition (the opposite direction of the ar- row).
| Remote | Main | |
| control unit | unit | |
|
|
| |
Can be operated |
|
| |
from either the | Cancel | Cancel | |
remote control unit or | |||
|
| ||
the main unit. |
|
| |
|
|
| |
Can only be operated |
|
| |
from the remote | Cancel | Hold | |
control unit. |
|
| |
|
|
| |
Can only be operated | Hold | Cancel | |
from the main unit. | |||
|
| ||
|
|
| |
Cannot be operated |
|
| |
from either the | Hold | Hold | |
remote control unit or | |||
|
| ||
the main unit. |
|
| |
|
|
|
If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be
accidentally drained.
34
* | 35 | 99.3.11, 2:30 PM |
