Sharp MD-MT20H operation manual To interrupt playback, To stop playback, Resume auto play function

Models: MD-MT20H

1 44
Download 44 pages 40.08 Kb
Page 24
Image 24
To interrupt playback:

To interrupt playback:

Press the 06 button during playback.

To resume playback, press the 06 but- ton again.

To remove the MiniDisc:

Turn off the power and move the OPEN le- ver in the direction indicated by the arrow.

To stop playback:

Press the /:OFF button.

To turn off the power:

Press the /:OFF button whilst in the stop mode.

If the unit is not operated for at least 2 minutes whilst in the stop mode, the power will shut off automatically.

Resume auto play function:

When you press the /:OFF button to stop playback, or when you turn the power off and then you resume play- back, it will resume at the point on the MiniDisc where the playback was halted.

If the MiniDisc is removed and inserted, and playback is resumed, playback will start from the first track.

Precautions when making connec- tions:

Do not use any remote control unit, except for the one included with this unit.

Do not remove the rubber pads from the earphones.

Insert each plug securely, all the way in.

Be sure to hold the plug when remov- ing it. If you pull on the lead, it may break, or the unit may malfunction.

Interrupted sound:

This product is designed to eliminate interruptions in the sound which can be caused by vibrations. However, if the unit is continuously exposed to vibrations or mechanical shock, the sound may be interrupted momen- tarily.

When the sound is distorted:

If the volume is too high whilst the bass is being emphasised, the sound may be distorted, depending on the music on the track. If this happens, decrease the bass level or lower the volume level.

If the volume is increased to “VOL 24” or higher, the bass level will be ad- justed automatically.

(This is done to reduce the distortion in the sound.)

Caution:

When the unit is not to be used imme- diately after a MiniDisc has been in- serted, or when you plan to carry the unit, turn off the power or cancel the auto-play function. Otherwise, the auto-play function will be activated and the battery will run down.

Since the main unit and the AC adap- tor can heat up during use, you should avoid allowing the unit to be in direct contact with your skin for any length of time.

When using the unit with a car adaptor:

When you switch off the ignition key during playback, the power to this unit will also be turned off. Then, when the ignition key is switched on, playback will start from the beginning of the track where playback was halted (Resume auto-play function). However, the power to the unit may not be turned off when the ignition is turned off, de- pending on the type of car.

23

* MD-MT20H FOR UK(22-42)

24

99.3.11, 2:30 PM

Page 24
Image 24
Sharp MD-MT20H operation manual To interrupt playback, To stop playback, Resume auto play function, To remove the MiniDisc