Sharp MD-MT20H To erase tracks To erase tracks one at a time, To erase all of the tracks at once

■To erase tracks

To erase tracks one at a time:

1 Start playing the track you want to erase, and press the 06 button.

●The unit will enter the pause mode.

2 Press the EDIT button to select “ERASE”.

12

Number of the paused track

3 Press the ENTER/SYNC button.

●To cancel the operation, press the

■/:OFF button.

4 Press the ENTER/SYNC button again.

●The track will be erased.

34

5 To erase other tracks, repeat steps 1 -

4.

To erase all of the tracks at once:

1 Whilst in the stop mode, press the EDIT button to select “ALL ERASE”.

●“ALL ERASE” can also be selected by holding down the EDIT button for at least 2 seconds.

2 Press the ENTER/SYNC button.

●To cancel the operation, press the ■/:OFF button.

12

3 Press the ENTER/SYNC button again.

●All of the track numbers, track names, and disc names will be erased.

Notes:

●Once a track has been erased, it can- not be recovered. Double-check the track number before erasing it.

●When a track is erased, the numbers as- signed to the tracks following the erased track will be automatically decreased by one.

●When a track is erased, the track name will be erased at the same time.

19

* MD-MT20H FOR UK(01-21) 20 99.3.11, 2:29 PM