Sharp MD-MT20H To change disc names or track names, To delete characters, To add characters

■To change disc names or track names

Some MiniDiscs created on other equip- ment may have more than 100 characters in a track name or disc name. The charac- ters from the 101st character and on can- not be corrected or changed.

To delete characters:

1 Put the unit in the character input mode.

●To delete characters in a disc name, perform steps 1 - 2 on page 29.

●To delete characters in a track name, perform steps 1 - 3 on page 30.

2 Press the VOLUME + or VOLUME – but- ton to move the cursor to the character you want to delete.

3 Press the BASS button.

●The character will be erased.

4 Press the EDIT button.

■Name/stamp

Master MiniDisc	Recordable
(Prerecorded MiniDisc)	MiniDisc

1.The sound is recorded.

2.The character information, such as the disc name and track names is transferred

1Record the sound from the master MiniDisc onto a recordable MiniDisc.

Playback unit Recording unit

To add characters:

1 Put the unit in the character input mode.

●To add characters to a disc name, per- form steps 1 - 2 on page 29.

●To add characters to a track name, perform steps 1 - 3 on page 30.

2 Press the VOLUME + or VOLUME – button to move the cursor to the right of the character, where you want to add a new character.

3 Perform steps 3 - 5 in the “Disc name” section. (pages 27 - 28)

4 Press the EDIT button.

The sound is recorded.

MasterRecordable

MiniDiscMiniDisc

●Refer to the standard recording method. (Pages 9 - 15)

●At this point, only the sound is re- corded. No character information is transferred.

●Check whether the total number of tracks on the newly recorded MiniDisc matches the total number of tracks on the master MiniDisc. If they do not match each other, combine or divide tracks using the edit operation. (Pages 28 - 29)

●This function can not be performed from playback only MiniDiscs.

31

* MD-MT20H FOR UK(22-42) 32 99.3.11, 2:30 PM