Many potential “problems” can be resolved by the owner without calling a service techni- cian.
If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
PROBLEM | CAUSE | |
| ● Is the AC adaptor disconnected? | |
The unit does not turn | ● Is the battery exhausted? | |
● Is the unit in the hold mode? | ||
on. | ● Has condensation formed inside the unit? | |
| ● Is the unit being influenced by mechanical shock or by | |
| static electricity? | |
|
| |
| ● Is the volume set too low? | |
No sound is heard from | ● Is the remote control unit or the earphones plugged in? | |
the earphones. | ● Are you trying to play a MiniDisc with data on it instead | |
| of a MiniDisc containing music? | |
|
| |
When the operation | ● Is the unit in the hold mode? | |
● Is the battery exhausted? | ||
buttons are pressed, the | ||
● Is the remote control unit plug or the earphone plug in- | ||
unit does not respond. | serted firmly? | |
| ||
|
| |
Some sounds are | ● Is the battery exhausted? | |
skipped. | ● Is the unit being subjected to excessive vibration? | |
|
| |
The MiniDisc cannot be | ● Has the track number or character information been | |
ejected. | written on the disc yet? | |
● Is the unit in the recording or editing mode? | ||
| ||
|
| |
| ● Is the MiniDisc protected against accidental erasure? | |
| ● Is the unit connected properly to the other equipment? | |
Recording and editing | ● Is the AC adaptor unplugged or did a power failure | |
occur whilst recording or editing? | ||
are impossible. | ||
● Is the unit in the hold mode? | ||
| ||
| ● Is an optical signal being output from the external | |
| equipment? | |
| Read the operation manual for the external equipment. | |
|
|
■If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal sup- ply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1.Unplug the AC adaptor from the AC socket.
2.Remove the battery.
3.Leave the unit completely unpowered for approximately 30 seconds.
4.Plug the AC adaptor back into the AC socket and retry the operation.
If strange sounds, smell or smoke come out of the unit or an object is dropped into the unit, remove the AC adaptor from the AC socket immediately and contact an authorised SHARP service centre.
38
* | 39 | 99.3.11, 2:30 PM |