■Combine
1 Start playing the last of the two tracks you want to combine, and press the 06 button.
●The unit will enter the pause mode.
2 Press the EDIT button to select “COM- BINE”.
12
To combine the fifth and sixth tracks
3 Press the ENTER/SYNC button.
●To cancel the operation, press the
■/:OFF button.
3
(Confirming the combination)
4 Press the ENTER/SYNC button again.
●The two tracks will be combined, and the unit will be paused at the begin- ning of the combined track.
●The numbers assigned to the tracks following the combined track will be decreased by one automatically.
To combine two
When one or both tracks to be combined have a name:
The first track name will be used. However, when the first track does not have a name, the second track name will be used.
In the following cases, tracks cannot be combined.
●Tracks recorded in the monaural long- play mode and tracks recorded in the stereo mode.
●Tracks recorded from digital inputs and tracks recorded from analogue inputs.
●Tracks whose recording time is less than 12 seconds.
■Disc name
●Discs can be named using a maximum of 100 characters.
●Up to 1,700 characters (approximately) can be used in the disc and track names on a single MiniDisc.
1 Whilst in the stop mode, press the EDIT button to select “DISC NAME”.
2 Press the ENTER/SYNC button.
●The unit will enter the character input mode.
●To cancel the operation, press the
■/:OFF button.
12
Cursor
3 Press the DISPLAY button repeatedly to select the type of characters.
●The first 3 characters in the group of the selected characters will be dis- played for about 1 second.
ABC(Capital letters)
abc
123(Numbers and symbols)
4 Press the 5 or 4 button repeatedly to select the first letter in the name.
●When the button is pressed continu- ously, the displayed character will change rapidly.
34
29
* | 30 | 99.3.11, 2:30 PM |
