Sharp MD-MT20H Recording Using The Optical Digital Cable, Start recording Synchro recording Page

Models: MD-MT20H

1 44
Download 44 pages 40.08 Kb
Page 14
Image 14
RECORDING USING THE OPTICAL DIGITAL CABLE

RECORDING USING THE OPTICAL DIGITAL CABLE

This is the method used for recording digi- tal signals from CDs or MDs exactly as they are stored on the original. Compared to re- cordings made from analogue inputs, digi- tal recordings have extremely high-quality sound.

1 Connect the external equipment. (See page 9.)

2 Start recording.

Synchro recording: Page 11

Before starting a synchro recording, perform the following steps on the equipment connected to this unit.

(1)First, put it in the playback mode.

(2)Next, put it in the pause mode.

(3)Finally, position it at the beginning of the track you want to record.

(1)Insert a recordable MiniDisc, and then press the REC button.

(2)Press the ENTER/SYNC button.

(3)Start the playback on the equipment connected to this unit.

When you attempt to make a new digital recording from a track that was digitally re- corded on a MiniDisc.

MiniDiscs are designed so that only first generation digital copies can be made. Further digital copies are prevented by the SCMS (Serial Copy Management System).

Playback

 

 

 

Digital cable

Recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD player, MD player, etc.

Digitally recorded MiniDisc

Playback

Digital cable

Recording

Analogue recording is possible.

Manual recording: Page 12

(1)Insert a recordable MiniDisc, and then press the REC button.

(2)Press the 06 button.

When recording from digital inputs,it is not necessary to adjust the record- ing level.

There are cases where digital recording may be impossible.

In the following cases digital recording is impossible, even if you are using digital cables.

Notes:

This unit incorporates a sampling rate converter.

When this unit is connected to digital equipment such as Digital radios or DAT tape recorders that use a different sam- pling frequency (32 kHz or 48 kHz), re- cordings can still be made. (The sam- pling frequency of this unit is 44.1 kHz.)

When making a digital recording from a portable CD player (if the player has a sound skip prevention function and this function is turned on) the optical output will drop out and digital recording will not be possible. Be sure to turn the sound skip prevention function off.

13

* MD-MT20H FOR UK(01-21)

14

99.3.11, 2:29 PM

Page 14
Image 14
Sharp MD-MT20H Recording Using The Optical Digital Cable, Start recording Synchro recording Page, Manual recording Page