PX502 Tape Library Quick Start Guide
Figure 6 Rail Adapter Types | Figure 7 Assembling the Left- |
|
| Hand Rack Mount Shelf |
|
| Arrow must | Rail adapter |
|
| |
| point up |
|
Use the rail adapters with blocks on rails with square hole patterns
|
|
|
| lf | M5 x 10 Allen |
|
|
| e |
| |
|
| h |
| screws | |
|
| ts |
|
| |
|
| f |
|
|
|
| e |
|
|
| |
| L |
|
|
|
|
| M5 x 10 Allen | Arrow must | |||
Rail adapter | screws |
|
| ||
|
| point up | |||
|
| Rail adapters | |||
| Ri |
|
|
|
|
| g |
|
|
|
|
| h |
|
|
|
|
| t |
|
|
|
|
| s |
|
|
|
|
| h |
|
|
|
|
| e |
|
|
|
|
| l |
|
|
| |
|
| f |
|
|
|
Use the rail adapters with circle pegs (opposite blocks) on rails with
M5 x 10 Allen screws
FlexLink opening located towards the back for the right- hand shelf
M5 x 10 Allen 
screws 
Use the rail adapters with small circle pegs on rails with threaded circle hole patterns (M6 on one side and M5 on the other side)
dAttach the appropriate rail adapter to the front and back of the rack mount shelves (right and left) with 2 M5 x 10 Allen screws per adapter (see figure 7).
2Install the left and right rack mount shelves into the rack (the rack mount shelves adjust 27 in. to 36 in.) and secure with the following parts in four locations (see figure 8):
•Mounting plate
•2 M4 x 12 Allen screw.
NOTE: The rack mount shelves must be installed on the inside rack rails.
7