PX502 Tape Library Quick Start Guide
Figure 8 Installing the Rack
Mount Shelves
Mounting plate
M4 x 12
Allen screws
Left shelf 
Right shelf
3Once the rack mount shelves are secured to the rack, tighten the Allen screws securing the adjustable shelves (right and left) together (see figure 9).
Figure 9 Tightening the Rack
Mount Shelves
Tighten screws to 
secure
both rack mounting r
ails
Installing the Library Chassis
WARNING: The PX502 tape library weighs approximately 52 lbs (23.6 kg). At least two people are required to lift and install the library.
1The back mounting brackets are lettered (A through I) so the correct mounting position is easily determined. The mounting positions differ depending on the depth of the rack (see table 4).
NOTE: If the depth of the rack is less than 27 in, do not install the back mounting brackets or clamps.
8