Installing the Rack Mount Shelves, Qty

PX502 Tape Library Quick Start Guide

Table 3 Library Mounting Hardware

Installing the Rack Mount Shelves

Before installing the rack mount shelves, you must collect the following information:

Qty

Figure

4 metric and 4 standard

					r
				e
			d
		n
	e
	t
x
E

		f
		l
	e
h
S

4 sets

2sets

Description

Allen head screws (M5 x 10) for shelf assembly

PN 90-87203-01

T- nuts (M5)

PN 74-87575-01

Rail adapters (both metric and standard holes are included, 8 total adapters, see figure 6)

PN 74-88052-01 (metric)

PN 74-88053-01 (standard)

Right and left support shelves (left shown)

PN 74-88055-01 (shelf)

PN 74-88056-01 (extender)

Front and back rail mounting hardware (M4 x 12 allen screws and mounting plates)

PN 74-88054-01 (plate)

PN 90-87203-03 (screws)

Back bracket hardware (M5 x 8 allen screws and mounting plate)

PN 74-88057-01 (bracket)

PN 90-87275-01 (screws)

Back clamp hardware (M5 x 10 and back clamp)

PN 90-87343-08 (screws)

PN 74-88058-01 (clamp)

•Type of rack mount rails (square hole, through hole, or threaded hole)

•Depth of rack (34 in, 86.3 cm minimum depth recommended; however, rack depths of 24 in, 60.9 cm to 36 in, 91.4 cm are supported)

1Assemble the rack mount shelves (left and right):

a Determine the mounting hole locations. The holes used to attach the two halves of the rack mount shelves differ depending on the depth of the rack (see figure 4).