Electrical Accessories
Electrical Accessories
Installation of the PVD may require accessory electronic equipment for proper and safe operation. Some of this equipment may not be available through PSC, but could be available through your dealer, forklift parts provider, or other suppliers. See Appendix A, “Accessories and Peripherals” on page 25.
DC/DC Converter. Voltage step down device used to power the terminal from +24, +36 and +48 volt battery systems.
DC Conditioner/UPS. Used to provide backup DC power during sags or interruptions in battery voltage due to peak loads or disconnect.
Delay Timer. Provides automatic
Noise Spike/RF Filter. Used to suppress high voltage and RF voltage spikes on the power system.
Electrical Accessory Matrix
Table 1 summarizes the accessory recommendations and options available depending on the forklift voltage application. This matrix should be used only as a reference and may not include accessories for all applications.
Table 1. Electrical Accessories
|
| Forklift System Voltage |
| ||
Accessory |
|
|
|
| |
12 volt | 24 volt | 36 volt | 48 volt | ||
| |||||
|
|
|
|
| |
DC/DC Converter | Not Required | Required | Required | Required | |
|
|
|
|
| |
DC Conditioner/UPS | Optional* | Not Required | Not Required | Not Required | |
|
|
|
|
| |
Delay Timer | Optional* | Optional* | N/A | N/A | |
|
|
|
|
| |
Noise Spike/RF Filter | Recommended | Recommended | Recommended | Recommended | |
|
|
|
|
| |
Required | Required | Required | Required | ||
|
|
|
|
| |
*Ensure that the device being installed is properly rated for use on your vehicle.
Installation Guide | 7 |