PSC 1000I manual Quick Reference, Installation

Quick Reference

This guide is provided to help get your installation up-and-run- ning quickly and efficiently. For more details, including program- ming information, reference the Product Reference Guide (PRG), which is available for viewing and download from the PSC web- site listed on the back cover of this manual.

Installation

Route the interface cable from the terminal or host. Plug the AC adapter (if one is used) into a wall outlet and the interface (I/F) cable, then route and attach the I/F cable to the scanner. Verify operation by presenting known-good bar codes to the scanner. The unit should beep1 and/or flash its good read LED and send the bar code data to the host or terminal. If not, refer to the Trou- bleshooting section of this guide.

Scanner installation is complete.

Connect Here

I/F Cable	To Host/Terminal	For 220-230 VAC
		adapters, the
		cord must be
		facing down as
		shown in the
		illustration. If
		installed upwards,
	A/C Adapter	it will pose an
	(if needed)	undue strain on the
		socket outlet.

1.Beeper and LED behavior is selectable and may have been disabled by a previous user.

Quick Reference Guide 1