Proxim 7921, 7920 manual

There are also four LEDs on the back panel of the RangeLAN2

792x Ethernet Adapter:

❑The green “Master” LED, located between the DC power jack and the serial interface, is on steady when the unit is set as a Master.

❑The yellow “Sync” LED, located between the DC power jack and the serial interface, is on steady when the unit is set as a Station and is synchronized to a Master.

❑The green “Link” LED, located between the serial interface and the 10BASE-T connector, is on steady to indicate an Ethernet link between the Ethernet Adapter and the Ethernet-ready device. This LED blinks when the unit sends packets through its Ethernet port. Note that this LED will blink on occasion even if a proper 10BASE-T cable is not connected.

❑The yellow “Override” LED, located between the serial interface and the 10BASE-T connector, is on steady when the Station Type and Domain parameters config- ured by the software interface override those set by the external rotary switches.

20