Antenna Options
The Ethernet Adapter is shipped with a standard directly-con- nected antenna. To install the antenna, screw it clockwise onto the antenna connector. Proxim sells several antenna alternatives, including higher gain omnidirectional and directional antennas. Each of these antennas ship with installation and mounting instructions. For information on additional antenna options, please contact your Proxim Sales Representative.
Mounting Options
The Ethernet Adapter was designed to sit on a flat surface. However, there are four pre-threaded holes on the underside of the unit so that it may be mounted on any surface. The mounting holes are shown Figure 14. These holes are a #6-32 tap and 0.175" deep. Screws and mounting tools are not provided by Proxim.
Note:
When mounting the Ethernet Adapter onto a flat surface, you may need to remove the plastic feet from the underside of the unit so that the mounting holes are flush against the mounting surface. The plastic feet are glued onto the underside of the unit and can be removed with a small flat-head screwdriver.