Proxim 7921, 7920 manual Advanced Parameters, 300

Advanced Parameters

Parameter Name	Range	Default
Set IP Address	-	0.0.0.0
Forwarding Database	10 to 1,000,000 seconds	300
Table Timeout
CPU Power Save Mode	Y/N	No
Echo Mode	None, Simple, and	Terminal
	Terminal
Technical Support	N/A	N/A
Access

Set IP Address allows you to assign the Ethernet Adapter a unique network IP address. If the unit is attached to an Ethernet- ready device, do not assign the Ethernet Adapter the same IP address as the Ethernet-ready device. The Ethernet Adapter must have its own IP address if you choose to give it one.

Note:

The IP Address parameter is provided for diagnostic purposes so that a remote system may ping the Ethernet Adapter.

The Forwarding Database Table Timeout parameter allows you to control the length of time the Ethernet Adapter will hold a learned address of a network node in its Forwarding Database Table. This data is dynamically acquired by the RangeLAN2 Ethernet Adapter so that it can forward packets properly to wired and wireless nodes. By default, a Forwarding Database Table entry will expire after 300 seconds or 5 minutes.

40