Proview XAP series manual Installation, Connecting Your LCD Monitor to a Computer

Page 13

Installation

2 Installation

Refer to the owner’s manual of the computer for connections. In the process of connecting external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.

Connecting Your LCD Monitor to a Computer

Method 1: Analog (D-SUB) Connection

1Turn off the computer and unplug the power cable.

2Fit the DVI-I to D-SUB adapter onto the signal cable of the LCD monitor.

3Connect the signal cable to the D-SUB port on the back of the computer.

4Connect the audio cable to the line-in port on the back of the computer.

4	Connect to the
	Line-in port

2 Attach the DVI-I to D-SUB

3 adapter and connect to the D-SUB port

12	Xerox© LCD Monitor User’s Manual

Image 13

Contents LCD Monitor By Xerox Corporation. All rights reserved Table of Contents Europe Recycling PlaceCE Marking Declaration Of Conformity Federal Communications Commission FCC Statement Important Safety Instructions On next Collection service Introduction FeaturesPackage Contents DOWN/UP Front View and ControlsConnecting Your LCD Monitor to a Computer InstallationConnect the power cord to wall outlet and LCD monitor Method 2 Digital DVI Connection Digital Input Using Your LCD Monitor English First, release the LCD monitor’s stand lock 30o Next, adjust the height of the stand’s postInstalling the Wall Mount optional to Your LCD Monitor OSD Menu Using the OSD MenuOSD Options PhaseColor Select User ModeOSD Technical Information Preset Mode Timing ChartPIN Description DVI Connector PIN AssignmentSUB Connector PIN Assignment Visual Inspection Plug and PlayPermanently unlit or lit pixels Monitor will not turn on TroubleshootingNo picture Poor picture or abnormal pictureModel SpeciﬁcationsAuthorized Service Centers