Proview XAP series manual Plug and Play, Visual Inspection, Permanently unlit or lit pixels

Page 29

Technical Information

Plug and Play

This monitor conforms to the VESA DDC (Display Data Channel) standard, which means that when it is used with a DDC compatible video card, the monitor is easier to set up. With VESA DDC 1/2B, when the monitor is turned on, it will automatically notify a windows 9X/2000/XP host computer of its scanning frequencies, capabilities and characteristics. Windows 9X/2000/XP will automatically recognize the presence of the monitor and select the appropriate display resolution.

Visual Inspection

Permanently unlit or lit pixels

The standard of production techniques today cannot guarantee an absolutely fault free LCD display. A few isolated permanently lit or unlit pixels may be present. The maximum permitted number of pixel faults is stipulated in the stringent international standard ISO 13406-2 (Class II).

Example:

A 17” flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are about 4 million dots in total.

According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e. a total of 25 faulted dots. This corresponds to approx. 0.002 % of the entire screen surface.

28

Xerox© LCD Monitor User’s Manual

Page 28 Page 30
Image 29
Page 28 Page 30
Contents LCD Monitor By Xerox Corporation. All rights reserved Table of Contents Europe Recycling PlaceCE Marking Declaration Of Conformity Federal Communications Commission FCC Statement Important Safety Instructions On next Collection service Introduction FeaturesPackage Contents DOWN/UP Front View and ControlsConnecting Your LCD Monitor to a Computer InstallationConnect the power cord to wall outlet and LCD monitor Method 2 Digital DVI Connection Digital Input Using Your LCD Monitor English First, release the LCD monitor’s stand lock 30o Next, adjust the height of the stand’s postInstalling the Wall Mount optional to Your LCD Monitor OSD Menu Using the OSD MenuOSD Options PhaseColor Select User ModeOSD Technical Information Preset Mode Timing ChartPIN Description DVI Connector PIN AssignmentSUB Connector PIN Assignment Permanently unlit or lit pixels Plug and PlayVisual Inspection Monitor will not turn on TroubleshootingNo picture Poor picture or abnormal pictureModel SpecificationsAuthorized Service Centers
Top Page Image Contents