Proxim 5012-SUR manual Tighten Band Clamps

Page 15

Step 6: Tighten Band Clamps

1.Using a 5/16” nutdriver or a screwdriver, fully tighten both band clamps (maximum torque 50 kg-cm/3.6 lbf-ft).

2.Secure Ethernet cable to the pole with cable ties. Provide some slack between the unit and the first cable tie, which should be within 12 inches of the unit. Continue to secure cable with cable ties at 3-foot intervals.

The final assembly, using the optional Proxim universal pole mounting kit (P/N 1087-UMK), is shown below.

All rights reserved

Page 15

Image 15
Contents Quick Install Guide Trademarks CopyrightContents Introduction Key FeaturesPackage Contents Hardware and Software Installation Choose a location Attach cables All rights reserved Mount Unit to Pole All rights reserved Status Power Wireless Link Ethernet Link View LEDs/Adjust MountingClose Cable Compartment Assembly with the cable cover attached is shown below Tighten Band Clamps Available from C\Program Files\Tsunami\MP.11 5012-SUR Install Documentation and SoftwareInitialization Setting the IP AddressCopyright 2006 Proxim Wireless Accessing the Web Browser Ethernet Port Accessing the Command Line InterfaceSetting Default Default SettingsNAT Technical services and support Support OptionsHours of Operation