Proxim 5012-SUR manual Introduction, Key Features

Page 4

Introduction

The Tsunami MP.11 Model 5012-SUR is a flexible wireless outdoor client that let you design solutions for point-to-point links and point-to-multipoint networks.

The 5012-SUR is part of the Tsunami MP.11 product family, which is comprised of several additional products, including the 5054 Base Station and Subscriber Units, and the 5012-SUI Subscriber Unit for indoor installation; and the 5054- R, 5054-R-LR, and 2454-R Base Station and Subscriber Units for outdoor installation. The 5012-SUR is fully compatible with Base Station models 5054, 5054-R, and 5054-R-LR.

Key Features

Some of the key features of the Tsunami MP.11 5012-SUR are:

The use of a highly optimized protocol for outdoor situations

Routing and bridging capability

Asymmetric bandwidth management

Management through a Web Interface, a Command Line Interface (CLI), or Simple Network Management Protocol (SNMP)

Software and configuration upgrade through file transfer (TFTP)

Integrated antenna

VLAN support (configured on Base Station)

This document shows the basics of setting up the units. For detailed information, see the Tsunami MP.11 Model 5012-SUR Installation and Management Guide.

Page 

Copyright © 2006 Proxim Wireless

Image 4
Contents Quick Install Guide Copyright TrademarksContents Key Features IntroductionPackage Contents Hardware and Software Installation Choose a location Attach cables All rights reserved Mount Unit to Pole All rights reserved View LEDs/Adjust Mounting Status Power Wireless Link Ethernet LinkClose Cable Compartment Assembly with the cable cover attached is shown below Tighten Band Clamps Install Documentation and Software Available from C\Program Files\Tsunami\MP.11 5012-SURSetting the IP Address InitializationCopyright 2006 Proxim Wireless Accessing the Web Browser Accessing the Command Line Interface Ethernet PortDefault Settings Setting DefaultNAT Support Options Technical services and supportHours of Operation