Proxim 5012-SUR manual Copyright 2006 Proxim Wireless

Page 18

2.Select the unit for which you want to set the IP address and click Change. The Change dialog window is displayed.

3.To set the IP address manually, ensure that Static is selected as the IP Address Type and fill in the IP Address and Subnet Mask suitable for the LAN subnet to which the unit is connected.

To set the IP address dynamically, ensure that Dynamic is selected as the IP Address Type. The unit will request its IP address from a DHCP server on your network.

4.Enter the Read/Write Password (the default value is public) and click OK to confirm your changes. The respective unit reboots to make the changes effective.

Page 18

Copyright © 2006 Proxim Wireless

Image 18
Contents Quick Install Guide Copyright TrademarksContents Key Features IntroductionPackage Contents Hardware and Software Installation Choose a location Attach cables All rights reserved Mount Unit to Pole All rights reserved View LEDs/Adjust Mounting Status Power Wireless Link Ethernet LinkClose Cable Compartment Assembly with the cable cover attached is shown below Tighten Band Clamps Install Documentation and Software Available from C\Program Files\Tsunami\MP.11 5012-SURSetting the IP Address InitializationCopyright 2006 Proxim Wireless Accessing the Web Browser Accessing the Command Line Interface Ethernet PortDefault Settings Setting DefaultNAT Technical services and support Support OptionsHours of Operation