Printronix T5000e setup guide Loading Ribbon

Loading Ribbon

Loading Ribbon

Ribbon

Take-Up Core

Ribbon

Take-Up Spindle

Spindle

Flange

Ribbon

Roll

Pivoting

Deck

Ribbon Supply Spindle

Deck Lock Lever

1. Install the ribbon take-up core on the ribbon take-up spindle.

NOTE: The first ribbon take-up core comes with the printer.

Thereafter, use the core from the old (used up) ribbon.

2.Slide the ribbon roll onto the ribbon supply spindle until it stops against the spindle flange.

3.Open the pivoting deck by rotating the deck lock lever fully clockwise until the deck swings upward.

31