RFID CONTROL Submenus
RFID CONTROL
(cont. from previous page)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Custom Tag Len |
| 8* |
| |||
|
|
|
| |||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Custom Tag Class |
| Class 1* |
| |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 to 32
Class 0 |
| Class 0+ |
| ||
|
|
|
Notes:
* = Default.
Italicized items are available only when you enable Admin User in the PRINTER CONTROL menu.
RFID CONTROL Submenus
RFID Reader
This menu item enables or disables the RFID encoder. The default is Enable.
Error Handling
This menu item selects the error handling mode for RFID failures. The default is Overstrike.
In Overstrike mode, each failed label prints with the Overstrike pattern and the form retries on a new label until the Label Retry count is exhausted. At this time, the error message “RFID Error: Check Media” displays. The failed label will not reprint.
In None mode, no specific action is taken when a tag fails to be programmed.
In Stop mode, when a tag fails to be programmed, the printer will halt and display the error message “RFID Error: Check Media.” The label is discarded and reprinting of the label (if desired) must be initiated from the host. When the error is cleared, the label with the failed tag moves forward until the next label is in position to be printed.
51