Printronix T5000e setup guide Read Tag

	Read Tag
	datafield is ignored, and dynamic data
	must be entered via the RF command in
	the EXECUTE mode. The length of the
	dynamic data must be equal to L.
LOCK;	Optional parameter to write-protect the
	data. Currently not supported.
ATp;	p specifies the decimal start position
	where data will be written to the tag.
	Subsequent bits will be shifted and
	previous bits are nulled.

(D)Delimiter designating the start and end of static data for the RFWRITE field. Replace (D) with any printable character, except the SFCC and “/” (the slash character).

datafield The static data of the RFWRITE field.

NOTE: RFWRITE fields are not expandable in VDUP and/or

HDUP sections.

Read Tag

Read Tag is not a command, but an element of the ALPHA and BARCODE commands. See “Alphanumerics” and “Bar Codes” in the IGP/PGL Programmer’s Reference Manual for more information.

Purpose Embed RFID data into an ALPHA or BARCODE data field.

Format <RDI>position,length[,format];

<RDI>	The RFID Data Indicator character, as
	defined by the RFREAD parameter in the
	ALPHA or BARCODE commands. See
	the ALPHA and/or BARCODE command
	description for details.
position	The decimal number that specifies the
	starting position of the data inside the
	transponder.

57