Industrial Modem MIU56 User Guide
Modem Controls and Indicators
Links (Internal controls)
LK1 | 1 | Set factory defaults |
| 2 | Normal |
LK2 | 1 | Reserved |
LK3 | 1 | Reserved |
LK4 | 1 | Reserved |
LK5 |
| Reserved |
LK6 |
| Reserved |
LK7 |
| Reserved |
LK8 | 1 | Power down disabled |
| 2 | DTR wakeup enabled |
| None | DTR wakeup disabled |
LK9 |
| Link connects RS232 shield to ground |
PSTN | IN | PSTN |
| OUT | Leased Line |
LEDS
DCD - Data Carrier Detect (Inner LED)
LED will glow when the modem detects a valid carrier signal from a remote modem.
PWR - Power (Outer LED)
LED will glow to indicate when the modem is turned on. LED will be off when the modem is in power down mode.
MIU56Robert Way | Page 6 | 2/28/2003 |