Telenetics MIU56 manual Distinctive Ring, AT-SDR=0, AT-SDR=7

Industrial Modem MIU56 User Guide

Distinctive Ring

The Industrial Modem is able to discriminate between three different types of rings. This is useful if you purchase the dual line service. With dual line service, two phone numbers are shared for one telephone line. One number can be used for Voice and the other number can be used for your Modem. To enable the modem to answer only when your modem number is dialled, issue the command: AT-SDR=4 S0=2&W.

AT-SDR=n,x	where n=0 to 7, default=0,
	x=0 Disable Distinctive Ring response suffix;
	x=1 Enable Distinctive Ring response suffix (default)
AT-SDR=0	Any ring detected and reported as "RING"
AT-SDR=1,1	Single ring detected and reported as "RING1"
AT-SDR=1,0	Single ring detected and reported as "RING"
AT-SDR=2,1	Double ring detected and reported as "RING2"
AT-SDR=2,0	Double ring detected and reported as "RING"
AT-SDR=3,1	Single and double ring detected and reported as "RING1"or"RING2"
AT-SDR=3,0	Single and double ring detected and reported as "RING"
AT-SDR=4,1	Triple ring detected and reported as "RING3"
AT-SDR=4,0	Triple ring detected and reported as "RING"
AT-SDR=5,1	Single and triple ring detected and reported as "RING1"or"RING3"
AT-SDR=5,0	Single and triple ring detected and reported as "RING"
AT-SDR=6,1	Double and triple ring detected and reported as "RING2"or"RING3"
AT-SDR=6,0	Double and triple ring detected and reported as "RING"
AT-SDR=7	Any ring detected and reported as "RING1"or "RING2"or"RING3"

+Use AT-SDR=4 for dual line service. Do not set Auto Answer below 2 when Distinctive Ring is

enabled.

MIU56Robert Way Page 18 2/28/2003