SSI America ERP2U manual AC Line Fast Transient Specification, AC Line Surge Transient Performance

SSI

					ERP2U Power Supply Design Guide, V2.31
					recoverable
		Table 6: AC Line Surge Transient Performance
			AC Line Surge
Duration	Surge	Operating AC Voltage		Line Frequency	Performance Criteria
Continuous	10%	Nominal AC Voltages		50/60 Hz	No loss of function or performance
0 to ½ AC	30%	Mid-point of nominal AC		50/60 Hz	No loss of function or performance
cycle		Voltages

5.10 AC Line Fast Transient Specification

STATUS

Recommended

The power supply shall meet the EN61000-4-5directive and any additional requirements in IEC1000-4-5:1995and the Level 3 requirements for surge-withstand capability, with the following conditions and exceptions:

•These input transients must not cause any out-of-regulation conditions, such as overshoot and undershoot, nor must it cause any nuisance trips of any of the power supply protection circuits.

•The surge-withstand test must not produce damage to the power supply.

•The supply must meet surge-withstand test conditions under maximum and minimum DC-output load conditions.

- 14 -