SOYO SY-6BA+ IV user manual PNP/PCI Configuration Setup

BIOS Setup UtilitySY-6BA+ IV

PNP/PCI Configuration Setup (Continued)

PNP/PCI		Setting		Description		Note
Setup
Interrupt	How to set the BIOS to release the IRQ to the PnP Interrupt pool:
Line	PnP / PCI configuration				Integrated Peripherals
IRQ 15	IRQ 15: PCI / ISA PnP				On-Chip Secondary PCI IDE:		disabled
IRQ 14	IRQ 14:		PCI / ISA PnP		On-Chip Primary PCI IDE:		disabled
					Interrupt 12 will be released by the PnP
IRQ 12	IRQ 12:		PCI / ISA PnP		BIOS automatically if the PS/2 Mouse Port
					is not used.
IRQ 7	IRQ 7: PCI / ISA PnP				Onboard parallel port:	disabled
IRQ 4	IRQ 4: PCI / ISA PnP				Onboard Serial port 1:	disabled
IRQ 3	IRQ 3: PCI / ISA PnP				Onboard Serial port 2:	disabled

4.Your OS may reassign another interrupt to a PCI slot after BIOS passes control to the OS, especially if you use Windows 95, 98 or NT.

Slot 1/2/3/4 Use IRQ NO.

Auto Default

Select one of the interrupts. Note: The selected IRQ will only be assigned if it is available. (Windows may reassign IRQs).

Used MEM base addr

Memory	8K,16K,32K,64K.	This item
length	(Please ask your card provider	appears only
	for the exactly memory length	when the [Based
	of this add-on card.)	MEM base
		addr] set to I/O
		address.

Assign IRQ
	Enabled	BIOS will assign IRQ for	Default
For USB		USB port.
	Disabled	BIOS won’t assign IRQ for
		USB port.
PnP OS
	Yes	Set this field to [Yes] if you
Installed		are running Windows 95,
		which is PnP compatible.
	No	If the OS you are running	Default
		does not support PnP	(If there is any
		configuration.	doubt, set this
			field to [No])

78