SOYO SY-6BA+ IV Onboard Parallel Ports, 3BCH/IRQ7, Address 278H/IRQ5 Parallel Port Mode

BIOS Setup UtilitySY-6BA+ IV

3-8.5 Onboard Parallel Ports

Onboard Parallel	Setting	Description	Note
Ports
Onboard Parallel
	378H/IRQ7	Choose the printer I/O	Default
Port	3BCH/IRQ7	address.
	278H/IRQ5

Parallel Port Mode

ECP/EPP

SPP

ECP

EPP/SPP

The mode depends on your Default external device that connects to this port.

If [Parallel Port Mode] is set to [ECP] mode

ECP Mode use

DMA

3	Choose DMA3	Default
1	Choose DMA1

If [Parallel Port Mode] is set to [EPP] mode

EPP Mode Select

PWRON After PWR-Fail

EPP 1.9	Select EPP port type 1.9
EPP 1.7	Select EPP port type 1.7	Default
On	The system will switch on
	when power comes back
	after a power failure.
Off	The system will remain off	Default
	when power comes back
	after a power failure.
Former-sts	The system will return to
	the state it was in before the
	power failure when power
	returns. (i.e: If the system
	was on, it will switch on

again, if it was off, it will remain off)

83