DAP modes —————————————————
The sound heard in a concert hall or club consists of direct sound and indirect sound — early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls. These direct sounds and indirect sounds are the most important elements of the acoustic surround effects. The DAP mode can create these important elements, and gives you a real “being there” feeling.
Basic operations
Press DSP MODE.
The currently selected DSP mode appears on the display when the button is pressed, and changes as follows each time the button is pressed subsequently.
=SURROUND ON= THEATER= LIVE CLUB= DANCE CLUB
=HALL=PAVILION =DSP OFF = (back to the beginning)
•SURROUND ON is selected when playing a video with audio recorded in Dolby Pro Logic, Dolby Digital, DTS digital, or MPEG Multichannel surround audio.
Note:
•It is possible to select only “SURROUND ON” and “SURROUND OFF” when playing a Dolby Digital audio, DTS digital audio, or MPEG Multichannel audio DVD.
On the front panel:
THEATER: Gives the feeling of a large theater.
LIVE CLUB: Gives the feeling of a live music club
with a low ceiling.
DANCE CLUB: Gives a throbbing bass beat.
HALL:Gives clear vocal and the feeling of a concert hall.
PAVILION: Give the spacious feeling of a pavilion with a high ceiling.
Notes:
•The DSP modes have no effect on monaural sources.
•The 
indicator lights up when the signals encoded with Dolby Digital come into the system.
•The 
indicator lights up when the signals encoded with Dolby Pro Logic decoder built in this system is activated.
•The
indicator lights up when the signals encoded with DTS Digital Surround come into the system.
•The 
indicator lights up when the signals encoded with MPEG Multichannnel Surround come into the system.
•The effects may be adjusted with “SOUND MENU settings” when the DAP mode is selected (see page 41).
IMPORTANT
Before recording a digital source, turn off the DSP mode.
To select the DSP mode ————————————
From the remote controls:
Primary remote control | Secondary remote control |
SURROUND |
|
|
| DSP MODE |
|
|
|
When playing a video with audio recorded in Dolby surround, Dolby digital, or DTS digital surround audio:
Press SURROUND.
The current status appears on the display when the button is pressed, and changes between SURROUND ON and SURROUND OFF each time the button is pressed subsequently.
When selecting DAP:
Press DSP MODE.
The currently selected DAP mode appears on the display when the button is pressed, and changes as follows each time the button is pressed subsequently.
=THEATER=LIVE CLUB=DANCE CLUB=HALL=PAVILION= DSP OFF=(back to the beginning)
Notes:
•“PRO LOGIC”, rather than “SURROUND ON”, is displayed when a source other than DVD is selected.
•The
•When the DSP mode is ON, the VCR OUT (REC) jack and the TAPE/MD OUT (REC) jack will output surround sound to the front speakers only.
When recording, turn the DSP mode OFF.
*Lo/Ro refers to the downmix output when connected to a device that does not use a Dolby Pro Logic decoder.
DSP MODE | DSP MODE |
21
