COMPU LINK Remote Control System
The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the center unit.
To use this remote control system, you need to connect JVC audio components through the COMPU
•Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.
Cassette deck
or
MD recorder
Notes:
•If your audio component has two COMPU
•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly.(see page 17).
•Refer also to the manuals supplied with your audio components. This remote control system allows you to use three functions listed right.
•Synchro recording for the casette deck or MD recorder using the COMPU LINK remote control system is not compatible with the center unit.
Remote Control through the Remote Sensor on the center unit
You can control the connected audio components through the remote sensor on the center unit using this remote control. Aim the remote control directly at the remote sensor on the center unit. For details, see page 10.
Automatic Source Selection ——————————
When you press the play (3) button on a connected component or on its own remote control, the center unit automatically turns on and changes the source to the component. On the other hand, if you select a new source on the center unit or on the remote control, the selected component begins playing immediately.
In both cases, the previously selected source continues playing without sound for a few seconds.
Automatic Power On/Off (Standby): only possible with the COMPU
Cassette deck (or MD recorder) turns on and off (standby) along with the center unit.
When you turn on the center unit, the cassette deck (or MD recorder) will turn on automatically, depending on which component has been previously selected.
When you turn off the center unit, the cassette deck (or MD recorder) will turn off (standby).
54
