JVC TH-A104 Operating Other Manufacturers’ Video Equipment, pressing TV/CATV/DBS, Press VCR, Code

Operating Other Manufacturers’ Video Equipment

To change the transmittable signals for operating a CATV converter or DBS tuner ——————————

1.	Set the remote control mode to “CATV/DBS.”
2.
	Press and hold	TV/CATV/DBS.
3.
	Press TV/DBS.
4.
	Enter manufacturer’s code (two digits) using
	buttons 1 ~ 9, and 0.

See the list on below to find the code.

Examples: For a Echostar product, press 2 then 1.

For a Pioneer product, press 1 then 3.

5. Release TV/CATV/DBS.

After setting the remote control mode selector to “CATV/DBS,” you can perform the following operations on the CATV convertor or on the DBS tuner:

	TV/CATV/DBS	: Turns on and off the CATV converter
		or DBS tuner.
CHANNEL +/–		: Changes the channels.

1 ~ 10, 0, 100+ (+10) : Selects the channel.

100+ (+10) button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number.

Note:

•Refer to the manual supplied with your CATV converter or DBS tuner.

6.Try to operate your CATV converter or DBS tuner by

pressing TV/CATV/DBS.

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of CATV

converter or DBS tuner, try each one until the correct one is entered.

Manufacturer	Code
ECHOSTAR	21
GI JERROLD	01, 02, 03, 04, 05,
	06, 07, 08
HAMLIN/REGAL	15, 16, 17, 18
PIONEER	13, 14
RCA	19
SCIENTIFIC ATLANTA	09, 10
SONY	20
ZENITH	11, 12

Manufactures’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

To change the transmittable signals for operating another manufacturer’s VCR ——————————

1.	Set the remote control mode to “AUDIO/TV/VCR.”
2.
	Press and hold			VCR.
3.
	Press VCR.
4.
	Enter manufacturer’s code (two digits) using
	buttons 1 ~ 9, and 0.
	See the list on below to find the code.
	Examples: For a JVC product, press 0 then 1.
		For a Funai product, press 1 then 0.
5.
	Release		VCR.

Following button can be used for operating the VCR (with the remote control mode selector set to “AUDIO/TV/VCR”):

VCR : Turns on and off the VCR.

After pressing VCR or VCR CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on the VCR:

PLAY : Starts playback.

1: Rewinds a video tape. ¡ : Fast winds a video tape. STOP : Stops operation. PAUSE : Pauses.

¶REC : Starts recording or enters recording pause.

After pressing VCR:

CHANNEL +/– :Changes the TV channels on the VCR.

1 ~ 10, 0, 100+ (+10) : Selects the TV channels.

100+ (+10) button will function as the ENTER button if your VCR requires pressing ENTER after selecting a channel number.

Notes:

•Refer to the manual supplied with your VCR.

•You can use either VCR button or the VCR CONTROL button to activate the buttons listed above. If you press VCR, the playing source also changes. On the other hand, if you press VCR CONTROL, the playing source does not change.

6.Try to operate your VCR by pressing VCR.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of VCR,

try each one until the correct one is entered.

Manufacturer	Code	Manufacturer	Code
JVC	01, 02, 03	PHILIPS	09
EMERSON	11, 26	RCA	05, 06
FISHER	29	SAMSUNG	24
FUNAI	10, 14, 15, 16	SANYO	21, 22, 23
GOLD STAR	12	SHARP	27, 28
HITACHI	04	SHINTOM	30
MITSUBISHI	13	SONY	18, 19, 20
NEC	25	ZENITH	08
PANASONIC	07, 17

Manufactures’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

58