Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control signals for other manufacturers’ VCRs, TVs, CATV converters and DBS tuners. By changing the transmittable signals from preset ones to the other manufacturers’, you can operate the other manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to the manuals supplied with them. To operate these components with the remote control, first you need to set the manufacturer’s code each for VCR, TV, CATV converters, and DBS tuner.
Primary remote control
Check to see if its remote control mode selector is set to the correct position.
To operate the audio system, TVs, and VCRs, set it to
“AUDIO/TV/VCR.”
To operate the CATV converter and DBS
tuner, set it to “CATV/DBS.”
To change the transmittable signals for operating another manufacturer’s TV
1. | Set the remote control mode to “AUDIO/TV/VCR.” | ||||
2. |
|
|
|
|
|
Press and hold |
|
|
| TV/CATV/DBS. | |
|
|
| |||
| |||||
3. |
|
| |||
Press TV/DBS. |
| ||||
4. |
| ||||
Enter manufacturer’s code (two digits) using | |||||
| buttons 1 ~ 9, and 0. |
| |||
See the list on below to find the code.
Examples: For a JVC product, press 0 then 1.
For a Hitachi product, press 1 then 0.
5. Release 
TV/CATV/DBS.
The following buttons can be used for operating the TV (with the remote control mode selector set to “AUDIO/TV/VCR”):
TV/CATV/DBS : Turns on and off the TV. TV VOL
TV/VIDEO : Sets the input mode (either TV or VIDEO).
After pressing TV/DBS (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a TV:
CHANNEL
1 ~ 10, 0, 100+ (+10) : Selects the channels.
100+ (+10) button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.
Note:
• Refer to the manual supplied with your TV.
6.Try to operate your TV by pressing 
TV/CATV/DBS.
When your TV turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of TV, try
each one until the correct one is entered.
Manufacturer | Code | Manufacturer | Code |
JVC | 01 | SAMSUNG | 12 |
HITACHI | 10 | SANYO | 13 |
MAGNAVOX | 02 | SHARP | 06 |
MITSUBISHI | 03 | SONY | 07 |
PANASONIC | 04, 11 | TOSHIBA | 08 |
RCA | 05 | ZENITH | 09 |
Manufactures’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
57
