User’s Manual
DST Bias
The item allows user to set the amount of time to move forward from the standard time for daylight saving time. The available options are <30>, <60>, <90> and <120> minutes.
3.6Record Schedule / Quality Setting
The Record Setup menu allows user to set recording quality, recording schedules, and other recording parameters. Administrator's password is required to use Record Setup menu. In the Main menu, move the cursor to <Record Setup> and press ENTER; the following menu is displayed.
| Record Setup |
|
1. Record Mode | 720×240@120PPS | |
2. | Schedule Setup |
|
3. | Preset Config | Standard |
4. | Per Camera Config |
|
5. esRecord Setup |
| |
6. | Data Lifetime | 0 Days |
7. | 15 Sec | |
8. | Circular Recording | ON |
9. Audio Recording | ON | |
10. Purge Data |
| |
3.6.1Record Mode
The Record Mode is for selecting resolution and recording rate. The relative record settings, such as preset configuration, will follow the record mode setting. In normal circumstance, we recommend you to select <720 × 240@120PPS> (<720×288@100PPS> in PAL format).
Move the cursor to <Record Mode> and press ENTER, then select a Record mode using UP / DOWN keys.
NOTE: After changing the Record Mode setting, the warning message “This will FORMAT ALL HARDDISKS and LOAD THE FACTORY DEFAULT CONFIG!” will be shown on the screen. Press ENTER to confirm the selection, then the unit starts to format the hard disks and load the factory default settings, or press ESC to abort.
We strongly recommend to backed up your programmed configuration before making any changes on Record Mode settings.
22
