User’s Manual
28
Viewing Live Image in Playback Mode
Press the MODE key repeatedly in playback mode, a 16-window viewing
mode contains both live and playback image appears. This view mode is
illustrated as the following figure.
The eight windows on the top side of the screen playback the Live video from
channel 1 to channel 8 respectively, and the other windows allow user to view
Playback image from channel 1 to channel 8.
4.1.5 Dual Main Output (For Unit with Turbo Module)
For users who use units with Turbo Modeule, they can use the Call Monitor as
the second Main Monitor, and access lots of functions, such as setup OSD
menu, and viewing in different mode, through the second Main Monitor. To
perform this function, you have to reset a jumper positioned on the Turbo
Module inside the unit.
To use this function, the VGA and BNC connectors, positioned on the rear
panel, have to be connected with monitors, respectively. The VGA monitor is
treated as the Main Monitor, and BNC monitor the second Main Monitor.
Press CALL key for 3 seconds, the BNC Monitor will be given the same
function as the VGA Monitor, except Playback and Search function. You can
use the BNC Monitor to take over the AVE DR16X / AVE DR8X unit at the
same time, as if the two monitors are connected to two individual AVE DR16X
/ AVE DR8X units.
When using this function, a small figure ( ) appears in the mid-button side
of the two monitors—the yellow one represents the monitor is now accessed.