User’s Manual
•Press CALL again on the point that you want to end the export. Now, the “ezBurn” window displays as below figure. The information shown on the window is for read only.
•
ezBurn confirmation
Selected Device:
| Real Export Range: | |
From: | 2005/11/07 | AM10:41:13 |
To: | 2005/11/07 | AM10:41:21 |
Enter: YES | ESC: NO | |
•If there is no any exportable external device connected to the DVR unit, then a warning message will be shown on the screen, as below figure:
No exportable device detected.
Please install the target device/media
to the DVR.
Enter: Retry ESC: Exit
• Press ENTER to start the export; or, press ESC to abort.
4.4.2.3To Export Event Video
To export event video, follow these steps:
•Press SEARCH and play wanted event video. To play event video, refer to OSD Menu Setup Guide, Section Searching Recorded Video.
•After entering the playback mode, press CALL. The “ezBurn” window displays as below figure. The information shown on it is for read only.
| ezBurn confirmation |
| |
| Selected Device: |
| |
| All data on the disc will be erased. |
| |
| Exported Required Size = 11 MB |
| |
| Export Event Info: |
| |
Data | Time | Ch | Type |
205/11/07 | AM10:42:35 | 13 | Motion |
| Enter: YES | ESC: NO |
|
•If there is no any exportable external device connected to the DVR unit, a warning message will be shown on the screen
•Press ENTER to start the export the whole event video to the connected device; or, press ESC to abort.
37
