Rear Panel Connections, Connecting Short-term Device | AVE MV DR16X

User’s Manual

Connecting Short-term Device

If you plan to install any short-term devices to the AVE DR16X / AVE DR8X series and use them as part of the unit system, such as USB CD-RW, USB Hard Disk Drive, etc. Make sure connecting those devices only during the unit is powered up. Because AVE DR16X / AVE DR8X series unit can recognize the external devices only after the power-up process is done completely.

2.4Rear Panel Connections

There are various connectors on the rear panel used for AVE DR16X / AVE DR8X series installations. The following figure shows the connectors by name; and followed by the detailed description of each connector.

Main Monitor (S-Video / BNC)

Both S-Video and BNC output connectors are offered for connecting to a main monitor. The main monitor displays live image and playback recorded video in full-screen or split-window format.

Call Monitor (BNC)

The call monitor is used to display full screen video of all installed cameras in sequence. The BNC call monitor connector allows user to connect the AVE DR16X / AVE DR8X series unit with an optional call monitor.

Video Input

16 BNC connectors are offered for video input streams from installed cameras. The number of connectors is equal to the number of channels.

10

Image 11

AVE MV DR16X, MV DR8X Rear Panel Connections, Connecting Short-term Device, Main Monitor S-Video / BNC, Call Monitor BNC

Contents

Ver User’s Manual User’s Manual Rack Mounting Important Information Table of Content Sequence with Main Monitor Sequence with Call Monitor Overview Product Key Features User’s Manual System Setup Product Application Diagram Selecting Video Format Connecting Devices to the UnitConnecting Required Devices Position the Unit Call Monitor BNC Connecting Short-term DeviceRear Panel Connections Main Monitor S-Video / BNC Camera Looping LAN Connector RJ-45Power Jack Power Switch RS-232C Alarm I/O & RS485USB Connector VGA Out LED Definition General System SetupFront Panel Introduction Functional Keys Fast Forward Fast Rewind Call/ Copy Instant RecordSEQ Sequence Direction Keys Install HDD to the Unit Reboot Power Up / Down the UnitTo Power Up the Unit Power Off Administrator Password User Password Entering OSD Setup Menu Date / Time Display System Date / Time SettingSet Date / Time Set Date / Time Daylight Saving Time DST Bias Record Schedule / Quality SettingRecord Mode Normal PPS Normal Size Event PPS Event Size Schedule SetupPreset Record Configuration To Record Event Video Only Per Camera Configuration Viewing in Full Screen Basic OperationViewing Live / Playback Video Viewing Modes Viewing Recorded Video Digital ZoomViewing Live Cameras To Freeze Live Image Pause Playback and Single Step Forward Key Usage in Playback Dual Main Output For Unit with Turbo Module Viewing Live Image in Playback Mode Sequence with Call Monitor Sequence SetupSequence with Main Monitor Searching Recorded Video Searching by Event Searching by Time Video Export Export from OSD Setup Menu Select Select the External DeviceDevice Name Available Select Events Select Video for ExportingSelect Channel From / To Time Export Format Digital SignatureErase Disc Quick Video Export through Front Panel To Export Normal Video EzBurn Introduction To Export Event Video Purge All Event Data Deleting Recorded VideoDome Control Purge All Data Dome Connection Dome Protocol Setup 3 RS485 Setup Dome Controlling Key Pan / Tilt Setting Preset PointsZoom Out Calling Preset Points All specifications are subject to change without notice Appendix a Technical Specifications User’s Manual