ARPEGGIO PARAMETERS – TYPE, RANGE, BUTTON MODE

The following parameters can be edited by selecting “TYP RNG TGL” on Page 1.

ARP TYPE

Select one of the following arpeggio types in this field – Up, Down, Incl, Excl,

Rand, Chrd.

1.While in Arp Type field, use [VALUE] dial to select Arp Type.

2.Use the [>] button to select the next field.

ARP TYPE

ARP TYPE

Arp Type descriptions:

UP – Notes arpeggiate from the lowest note to the highest note held.

DOWN – Notes arpeggiate from the highest note down to the lowest note.

INCL (Inclusive) – Notes arpeggiate from lowest to highest notes and back down. Lowest and highest notes are retriggered at the direction change.

EXCL (Exclusive) – Notes arpeggiate from lowest to highest notes and back down. Lowest and highest notes are not be retriggered at the direction change.

RAND (Random) – Plays held notes in random selection.

CHRD (Chord) – Repeats the held notes.

RANGE

Select the arpeggiator range in this field.

1.Use [<] or [>] buttons to select Range field.

2.While in Range field, use [VALUE] dial to select Range.

3.Use the [>] button to select the next field.

RANGE

BUTTON MODE

BUTTON MODE

In this field, you can select whether the [ARP ON/OFF] button will behave in a momentary (MTY) fashion, where pressing the button will turn on the Arpeggiator function and releasing it will turn it off, or in a toggle (TGL) manner, where pressing the button turns on the Arpeggiator function and pressing again turns it off.

1.Use [>] button to select Range field.

2.While in Range field, use [VALUE] dial to select Range.

3.Use the [>] button to select the next field.

23

Page 27
Image 27
Akai MPK25 manual Arpeggio Parameters TYPE, RANGE, Button Mode, ARP Type, Range