AFTERTOUCH PARAMETERS
For some applications, you might wish to use the knobs as Aftertouch controllers. In this scenario, the knob will be transmitting Aftertouch information which could be used to control, say, a vibrato of a device that the MPK25 is controlling. The following list of parameters can be accessed if “Aftertouch” is selected as the event type for the selected knob.
MIDI CHANNEL FIELD
MIDI PORT/CHANNEL FIELD
This field sets the MIDI Port and Channel which the knob will use to transmit messages. You can assign knobs to one of two MIDI Ports, A or B, and to one of 16 MIDI Channels on each port (i.e. A14). You can also assign a knob to use the MIDI Common Channel.
1.Use the [<] button to select MIDI Port/Channel field.
2.While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI Port and Channel.
3.Use the [>] button to select the next field.
Note: When not used via USB, only knobs assigned to port A will be transmitted via the
MINIMUM RANGE FIELD
This field is used to specify the minimum value that the Aftertouch will transmit.
1.Use [<] or [>] buttons to select Minimum Range field.
2.While in Minimum Range field, use [VALUE] dial to select desired minimum Aftertouch value.
3.Use the [>] button to select the next field.
MINIMUM RANGE FIELD
MAXIMUM RANGE FIELD
This field is used to specify the maximum value that the knob can output.
1.Use the [<] or [>] buttons to select Maximum Range field.
2.While in Maximum Range field, use [VALUE] dial to select desired maximum value.
MAXIMUM RANGE FIELD
18
