Hardware Installation |
|
(c) AGP Clock
This option allows you to manually adjust the AGP host bus clock frequency to a value determined as a fraction of the CPU host clock. For example:
With a CPU front side bus of 100MHz,
[Auto] sets à When [auto] is selected and the (FSB Frequency) is less then 100MHz, it will be divided by [/ 1]. Otherwise it will be divided by [/ 1.5].
[/ 1] sets à AGP Clock = 100MHz
[/ 1.5] sets à AGP Clock = 66.6MHz AGP Clock options are:
oAuto
o÷1.0
o÷1.5
(d) Vcore Voltage Adjust
The CPU notifies the board of what core voltage it requires by its VID outputs. The
Don’t forget to raise the upper limit of the CPU Vcore monitoring voltage in the Hardware Doctor™ utility if Vcore is set to higher voltage than VID specifies.
oNormal
o+ 2.5 %
o+ 5.0 %
o+ 7.5%
o+10.0 %
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue the boot sequence.
49