Brother BAS-761 instruction manual Stacker position adjustment

		10. Adjustments
10-5. Stacker position adjustment
	1.	Loosen the four bolts w and adjust the height of the
		stacker base q so that the workpieces stack neatly onto
w		the stacker base q.
t	2.	Loosen the two bolts e, and then adjust the vertical
		position of the stacker base q so that the workpieces
		stack neatly onto the stacker base q.
	3.	Loosen the bolt r and adjust the height of the inner
		work clamp bart.
q	4.	Loosen the bolt y and adjust the height of the outer

work clamp baru.

e

u

y

r

BAS-761 34