Brother BAS-761 instruction manual Error code Contents Reset Emergency Stop button pressed

12. Table of error code

Error code	Contents	Reset
E – 800	EMERGENCY STOP button pressed	Yes
E – 801	EMERGENCY STOP button pressed during sewing	Yes
E – 802	EMERGENCY STOP button pressed during programming	No
E – 803	EMERGENCY STOP button pressed during programming	Yes
E – 810	EMERGENCY STOP button is not connected	No
E – 820	No air, or air chuck is turned off	Yes
E – 821	No air, or air chuck is turned off	No
E – 830	X right overtravel switch activated	No
E – 840	X left overtravel switch activated	No
E – 850	Y up overtravel switch activated	No
E – 860	Y down overtravel switch activated	No
E – 870	X motor problem	No
E – 880	Y motor problem	No
E – 890	Machine head motor problem ∗	No
E – 900	Outer work clamp cylinder malfunction or sensor malfunction	No
E – 901	Inner work clamp cylinder malfunction or sensor malfunction	No
E – 902	Gauge forward/back cylinder malfunction or sensor malfunction	No
E – 903	Base 10 cylinder malfunction or sensor malfunction	No
E – 910	X axis positioning error	No
E – 920	Y axis positioning error	No
E – 960	Clamp-in sensor malfunction	No
E – 970	Clamp malfunction	No

*If the primary-side voltage is lower than the rated level at low temperatures, the error message “E-890” may appear at the sewing start. If this happens, set DIP switch A-7 to ON.

39 BAS-761