7. Settings before sewing
7. Settings before sewing
Press FOLDER RESET SW
to start searching for home position.
7-1. Setting the folder mode
FOLDING MODE AUTO
PATTERN
LABEL
STEP
Screen 1
Note
Background color of the selected mode turns reverse on display.
1.Turn on the air pressure and then turn on the power switch.
The screen shown at left will be displayed on the panel.
2.Press the FOLDER RESET button !9. The machine head will move to the home position and then stop in the standby condition.
1.Press the FOLDING MODE button w. Screen 1 will then be displayed.
2.Press the arrow keys !8to select the mode.
If the CANCEL button !5or FOLDING MODE button w is pressed once more, the mode will not be changed and the screen will return to the original display.
3.Press the ENTER button !6. The new mode will be set and the screen will return to the original display.
7-2. Setting the sewing speed and the bar tacking speed
¡These settings can be made when the machine head is at the standby position, while the bobbin is being replaced and while sewing is stopped.
¡The bar tacking speed cannot be greater than the sewing speed. If the bar tacking speed is set to a faster speed than the sewing speed, the bar tacking speed will become the same as the sewing speed when sewing is actually carried out.
Change sewing speed.
SEWING SPEED 4000 rpm
Screen 2-1
1.Press the SEWING SPEED button u. Screen
2.Press the arrow keys !8to select the desired sewing speed.
The sewing speed can be set in 9 steps from 500 to 4,250 rpm.
*If the CANCEL button !5is pressed, the sewing speed will not be changed and the screen will return to the original display.
18 |
