7. Settings before sewing
7-4. Setting the piece counter
¡This setting can be made when the machine head is at the standby position and while the bobbin is being re- placed.
¡The piece counter can be set to "0" (reset), or it can be decremented by 1, It cannot be incremented.
Change piece counter.
PIECE COUNTER | 1234 |
Screen 4
1.Press the COUNTER button i twice. Screen 4 will then be displayed.
2.Press the FAST button !3to reset the piece counter to "0".
Press the arrow key !8once to decrement the piece counter by 1.
*If the CANCEL button !5is pressed, the piece counter value will not be changed and the screen will return to the original display.
3.Press the ENTER button !6.
The piece counter will be changed to the new setting, and the screen will return to the initial display.
7-5. Setting the stacker roller feed amount
¡This setting can be made when the machine head is at the standby position and while the bobbin is being re- placed.
Change stack feed length.
STACK FEED LENGTH 250 mm
1.Press the COUNTER button i three times. Screen 5 will then be displayed.
Screen 5
2.Press the arrow keys !8to select the desired stacker roller feed amount.
The setting can be made in 9 steps from 0 mm to 400 mm, with each step being 50 mm.
3.Press the ENTER button !6.
The stacker roller feed amount will be changed to the new setting, and the screen will return to the initial display.
21 |
