SOYO SY-K7VTA manual Wake up On LAN/Ring, RTC Alarm Resume

	BIOS Setup Utility			SY-K7VTA
Wake Up		Setting	Description		Note
Events
HDD & FDD
		OFF
		ON	When On of HDD & FDD, any		Default
			activity from one of the listed
			system peripheral devices wakes up
			the system.

PCI Master

OFF		Default
ON	When On of PCI Master, any
	activity from one of the listed
	system peripheral devices wakes up
	the system

Wake up On LAN/Ring

Disabled

Enabled

An input signal on the serial Ring Default Indicator (RI) line (in other words,

an incoming call on the modem/LAN) awakens the system from a soft off state.

RTC Alarm Resume

Disabled	The system ignores the alarm.	Default
Enabled	Set alarm to power on the system by
	the date (1-31) or time (hh:mm:ss).

If the date is set to [0], the system will self-power on by alarm everyday at the set time.

Primary INTR

IRQs Activity

Monitoring

(Press Enter)

ON	When set to On, any event occurring	Default
	at will awaken a system which has
	been powered down.
OFF
Disabled	IRQ8 (RTC Alarm), IRQ9(IRQ2 Redir),
	IRQ10( Reserved), IRQ11(Reserved), IRQ15
	(Reserved)
Secondary	IRQ3(COM2), IRQ4(COM1), IRQ5(LPT2),
	IRQ6(Floppy Disk), IRQ7(LPT1),
	IRQ12(PS/2 Mouse), IRQ13(Coprocessor),
	IRQ14(HardDsik)

76