SOYO SY-K7VTA manual IDE Device Controls, Keyboard Controls, Ide

BIOS Setup Utility SY-K7VTA

The following tables describe each field in the INTEGRATED

PERIPHERALS Menu and provide instructions on how to configure the

IDE controls, FDC controls, and the onboard serial and parallel ports.

3-5.1 IDE Device Controls

IDE Controls

On-Chip PCI IDE

ØPrimary

ØSecondary

IDE Prefetch Mode

Setting	Description	Note
Disabled	Turn off the on-board IDE
Enabled	Use the on-board IDE	Default
Disabled	The onboard IDE drive
Enabled	interfaces supports IDE	Default

prefetching for faster drive accesses. If you install a primary and/or secondary add-in IDE interface, set this field to Disabled if the interface does not support prefetching.

IDE

ØPrimary Master PIO

ØPrimary Slave PIO

ØSecondary Master PIO

ØSecondary Slave PIO

IDE

ØPrimary Master UDMA

ØPrimary Slave UDMA

ØSecondary Master UDMA

ØSecondary Slave UDMA

mode 0-4 0 is the slowest speed 4 is the fastest speed

Auto	For better performance and	Default
	stability, we suggest you use
	the Auto setting to set the
	HDD control timing.
Disabled
Auto	Select Auto to enable Ultra	Default
	DMA Mode support.

3-5.2 Keyboard Controls

Keyboard Controls	Setting	Description	Note
Init Display First
	PCI Slot	Choose which card – AGP	Default
	AGP	Display card or PCI VGA card –
		to initialize first.

69