SOYO SY-6IEB quick start Introduction, Unpacking

Page 3

SY-6IEBQuick Start Guide

1 Introduction

Congratulations on your purchase of the SY-6IEBMotherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard.

This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-6IEB Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.

Introduction

Unpacking

* If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.

When unpacking the Motherboard, check for the following items:

S

BIO

Flash

uThe SY-6IEB 82440 EX/LX AGP/PCI Motherboard

uThis Quick Start Guide

uThe Installation CD-ROM

uThe CPU Retention Set

uOne IDE Device Flat Cable

uOne Floppy Disk Drive Flat Cable

uOne 9-pin serial connector with 9-pin flat cable and 6-pin PS/2 mouse connector with 6-pin cable

uOne 25-pin parallel connector with 25-pin flat cable and 9- pin serial connector with 9-pin flat cable

3

Image 3
Contents Quick Start Guide 6IEB Serial Version 2.0 Edition March SY-6IEB MotherboardUnpacking IntroductionSY-6IEB Motherboard Layout Preparations InstallationRetention Module Install the CPUMake Connections to the Motherboard Configure Memory Enable/Disable the Keyboard Wake-Up JP10Set the CPU Frequency Retain Cmos Data Clear Cmos Data Clear Cmos Data JP5Select Soyo Combo Setup Quick Bios SetupSelect Load Setup Default Select Standard Cmos SetupSoyo CD Insert the Soyo CD into the CD-ROM driveRead Soyo 6IEB Manual Install Drivers Driver Installation Menu Intel Southbridge Drivers Enter the Soyo CD Soyo Europe Edition March VersionInternational Headquarters USA Branch Office