SOYO SY-6BA+ III manual Sdram Memory Module Installation, Dimm

Hardware Setup SY-6BA+ III

Step 3. SDRAM Memory Module Installation

This Motherboard features 4 x DIMM Banks for 168-pin 3.3V unbuffered and registered DIMM modules. Your board comes with four DIMM sockets, providing support for up to 1GB of main memory using DIMM modules from 8MB to 256MB. For 66MHz front side bus CPUs use 12ns or faster memory; for 100MHz front side bus CPUs use 8ns (100MHz, PC100 compliant) memory.

Number of	DIMM 1		DIMM 2	DIMM 3	DIMM 4
Memory Modules
1	1st
2	1st		2nd
3	1st		2nd	3rd
4	1st		2nd	3rd	4th
RAM Type			SDRAM
Memory Module		8/16/32/64/128/256 Mbytes
Size (MB)

Note: (1) 256 MB memory modules available on PC registered DIMM only.

(2) Always install memory modules in the order prescribed in this table.

(3) Do not install unbuffered and registered memory modules together.

Important: It is of prime importance that you install DIMM modules as outlined in the table above in order to preserve signal integrity on 100MHz front side bus systems.

12