SOYO SY-6BA+ III Onboard Serial Ports COM1/COM2, Parallel Port PRT, PS/2 Keyboard, PS/2 Mouse

Hardware Setup SY-6BA+ III

1. Onboard Serial Ports COM1/COM2

External peripherals that use serial transmission scheme include:

-serial mouse,

-and modem.

Plug the serial device cables directly into the COM1/COM2 9-pin male connectors located at the rear panel of the Motherboard.

2. Parallel Port PRT

This parallel port is used to connect the printer or other parallel devices.

Plug the parallel device cable into the 25-pin female connector located at the rear panel of the Motherboard.

3. PS/2 Keyboard

Plug the keyboard jack directly into the 6-pin female PS/2 keyboard connector located at the rear panel of the Motherboard.

4. PS/2 Mouse

Similarly, plug the mouse jack directly into the 6-pin female PS/2 mouse connector.

5. Universal Serial Bus USB1/USB2

This Motherboard provides two USB ports for your additional devices. Plug the USB device jack into the available USB connector USB1 or USB2.

-USB devices under Win98 are allowed.

-With Win95, use the flow UniversalHCI specifications.

16